The department of Technological Machines and Equipment is a dynamic, constantly developing scientific educational and production structure. The department has strong ties, develops new ones with its sponsors, scientific and industrial partners.

The department "Technological machines and equipment" was founded in July 1959 on the basis of the department "Technology of metals and repair of machines", the first head of the department was Candidate of Technical Sciences, Dukhov T.G. Then in 1962 the department was divided into "Technology of metals" and "Repair of machines". Since October, 1996 by joining the departments "Repair of machines" and "Technology of metals", the department "Technology of metals and repair of machines" was formed again. In 2000 the department was renamed into the department " Mechanical Engineering ". In 2010 due to the introduction of the Bachelor's degree in the specialty "Technological Machines and Equipment" the department was renamed into the department "Technological Machines and Equipment".

The total number of employees of the department "Technological Machines and Equipment" is 31 people. The teaching staff of the department has 28 people, including 2 doctors of technical sciences, 17 candidates of technical sciences and PhD doctors.

The title "The Best Teacher of Higher Education Institution" 2021 - Candidate of Technical Sciences, Associate Professor G.A. Kokaeva.

The title "The best teacher of the university" 2022 - Doctor of Technical Sciences, Professor K.T. Sherov.

Contingent of students

Specialty performance in the IAAR ranking

More than 22 profile special disciplines are taught at the department, on specialties: B183 - "Agrarian engineering and technologies", B064 - "Technological machines and equipment", B095 - "Transport, transport technique and technologies", B076 - "Standardization, metrology and certification".

The department has the following specialized laboratories and classrooms:

4501, 4510 computer classrooms

4504 auditorium - Laboratory of Materials Science and TCM,

4505, 4506, 4507, 4512 auditorium - Classrooms

3123 auditorium - Laboratory of metal-cutting machine tools

3114 auditorium - Laboratory of installation, testing and exploitation of machine tools

3108 auditorium - Laboratory of machine tools cutting tools

3107 auditorium - Metalworking and Welding Workshop

4106 auditorium - Laboratory of mechatronics and robotics

T-02 auditorium - Training and production workshop

Kazakh-Chinese Agrarian Center of Metal Cutting and Laser Processing of Metals

The laboratories of the department are equipped with modern laboratory equipment:

1. Metal-cutting machines: lathe, drilling, press shears, band saw, grinding, bending, plasma cutter and CNC milling machines;

2. Welding equipment: transformers of electric arc welding, argon welding, gas welding, contact welding, welder's simulator;

3. Metal-cutting tools and measuring tools;

4. Muffle furnace, microscopes, hardness measuring instruments.

Utilization and improvement of the laboratory facilities of the department

Scientific and research work

Scientific - research work of the department is carried out on the following topics of scientific works:

1. Scientific grant of young scientists "Zhas Galym" for 2022-2024 on the theme "Increase of wear resistance of metal-cutting tools by the method of running-in". Scientific supervisor postdoctoral researcher Sagitov A.A.,

Scientific adviser Doctor of Technical Sciences, Professor K.T. Sherov.

1. Scientific grant for 2021-2023 on the theme "Improving the quality of restoration of agricultural machinery parts by developing compositions of repair composite mixtures on the basis of polymers, minerals, nano-additives".

Supervisor: Candidate of Technical Sciences, Associate Professor G.A. Kokaeva.

1. Scientific grant for 2023-2025 on the theme "Development of working bodies for forced crushing and grinding of forage from animal and plant wastes"

Supervisor: Candidate of Technical Sciences, Associate Professor Iskakov R.M.

List of scientific publications of faculty members

Students of the TME Department actively participate in research and development reports at the conferences "Seifullin Readings". Since 2020-2023 106 bachelors and 23 masters have made reports. They take part in republican contests of scientific works. In March 2023, 5 scientific works were submitted to the competition. Which were marked by diplomas and Algys Khat. Master student Orazalina A.A. received a diploma of the MSandHE RK II degree.

Dual education

For students of the 2nd year since 2017-2018 academic year laboratory works on the discipline "Metalworking machines and welding equipment" on the basis of LLP "Zapchast ZhD" (01.09.2021 concluded an agreement on the organization and conduct of dual education).

On March 10, 2023 the contract (F-11373) on the organization of a branch of the department at the enterprise "Zapchast ZhD" LLP was concluded.

In the current academic year concluded a contract with "Kazakhstan Paramount Engineering" LLP to conduct professional practical training on dual training (№D-10132 from 02.12.2022).

In the 2nd trimester of the current academic year, students of the 4th year had practical classes on the discipline "CNC System (Mechatronics Fundamentals)".

Connection with production

Lecturer: Business Development Director - Member of the Management Board of Ghalam LLP

Nsanov Aibol Mirzhanovich;

Date: November 10, 2022;

Discipline: Installation, testing and operation of technological machines

Lecturer: Lead Designer of Kazakhstan Aviation Industry LLP Toleu Dauren;

Date: November 11, 2022;

Audience: 1225;

Discipline: Metalworking machine tools and welding equipment;

Academic mobility of students

Educational and methodological work

Methodical work of the department of TME is aimed at improving the methodology of teaching disciplines, which are held in the form of presentations with the use of modern multimedia offline or online, also used in laboratory-practical classes computer modeling and practical analysis of the results.

Publication of educational and methodological literature

Userbaev Muratbek Turarbekovich

Grishin Alexander Nikolaevich

Sherov Karibek Tagaevich

Saule I. Mendalieva

Yerzhanova Akbota Yermukhamedovna

Sagitov Almat Ardakovich

Kossatbekova Dinara Shadiyarbekovna

Khan Valery Anatolyevich

Маgavin Sabit Shamilevich

Кokayeva Gulnara Aitikenovna

Smailova Bakhytgul Merzoyanovna

Baishugulova Shyryn Kadrmendenovna

Berdimuratova Didar Ibragimkuzu

Abulkhairov Darmen Karataevich

Bolatova Ainash

Kardassinov Sayat Mamyrbayuli

Menglen Dinara Zhuldyzbekovna

Saden Dinara Askarkyzy

Abdikerim Tulbaev

Mitrofanova Elena Anatolievna

Bobeev Abay Bakhanovich

Akchurin Aisultan Anvarovich

Ramazanova Zhanat Mussanovna

Uteulov Kanat Tulekbergenovich

Kardybai Sauatbek

Iskakov Ruslan Maratbekovich

Sirgetaeva Gulzhan Ermekovna

Konysbekov Marat Aitbekovich

Mazhitova Lyazzat Asharbekovna

International cooperation is a vital component of the department's activities. It demonstrates the work of the department and sets the standards of world leaders in the study of advanced trends and new knowledge, without which it is impossible to imagine modern education.

The main directions of work of the Department of "Technological Machines and Equipment" in the sphere of international cooperation:

- implementation of activities to expand and strengthen international contacts and cooperation, as well as activation of interaction with international and regional organizations, foreign universities, funds and programs;

- organization of mutual exchange of teachers and students in the development of agreements and projects of long-term cooperation programs with foreign partner universities;

- inviting domestic and foreign scientists to give lectures, conduct master classes and organize research works.

At the department of "Technological Machines and Equipment" functions Kazakhstan-Belarusian training and production center, Kazakhstan-Chinese center of agricultural mechanization, where bachelors, masters and doctoral students are trained on educational programs "Technological Machines and Equipment", "Mechanical Engineering", as well as in these centers undergo advanced training of teachers of other specialties.

Within the framework of the academic mobility program, every year students of 3-4 years of the department pass 6-7 months of agricultural practice under the programs "LOGO e.V", "AgrarKontakte" and "DEULA-Nienburg" in Germany Linen. Thus, in 2022, 9 students, including 3 students under the program "AgrarKontakte" and 6 students under the program "LOGO e.V" were interned. In 2023, 19 students, including 7 students from the "LOGO e.V" program and 12 students from the "DEULA-Nienburg" program, completed their internship. The students, during the foreign internship, consolidate their theoretical knowledge in practice, working with agricultural machinery and equipment, gain experience and improve their knowledge.

Also, in the framework of the Memorandum on mutual cooperation in the provision of educational services in the framework of academic mobility programs between NAO "Kazakh Agrotechnical University named after S. Seyfullin" and Belarusian State Agrarian Technical University (Republic of Belarus), from 2012 to 2020, students of the department 2 and 3 courses annually passed semester training in BGATU and industrial practice at the plant OJSC "Gomselmash", Gomel, Belarus.

Since 2009, Kazakhstan has been implementing the program "Attracting foreign scientists to Kazakhstani universities". It is aimed at internationalization of education, stimulation of active implementation of the Bologna Process principles, increasing the competitiveness of the university, formation of an attractive image of the university in the society, and also promotes the development of academic communication skills of students and teachers.

Within the framework of this program "Attraction of foreign scientists to Kazakhstani universities" the department annually invites scientists from leading universities to give lectures, consultations and seminars, as well as to be scientific supervisors of doctoral students. Invitation of scientists from abroad allows to develop competencies of students through new knowledge and methods of teaching from the position of international approach to the educational process. Also, the involvement of specialists is carried out for the purpose of professional development of the teaching staff of the department, to provide advice on various academic and scientific issues.

Invited professors - Shrini K. Upadhyaya (UC Davis, USA), Peter Enders (Humboldt University in Berlin, Germany), Akulovich Leonid Mikhailovich, Sergeyev Leonid Efimovich (Belarusian State Agrarian Technical University, Belarus), Drs. Temel Sariyildiz (Kastamonu University, Turkey), Farah Saleena Taip (Putra University, Malaysia), Jacek Cieslik, Marcin Kot, Bembenek Michał (AGH University of Science and Technology in Krakow, Poland), Karaivanov Dimitar Petkov (Chemical-Technological and Metallurgical University, Bulgaria), (AGH University of Science and Technology, Poland), Artiukhov Artem Evgenyevich (Sumy State University, Ukraine).

The department is working on expanding international cooperation with higher education institutions from near and far abroad, such as AGH University of Science and Technology in Krakow (Poland), University of Chemical Technology and Metallurgy (Bulgaria), University of Applied Sciences Weihenstephan-Trisdorf (Germany), University of California at Davis (UC Davis, USA), Humboldt University in Berlin (Germany), Belarusian State Agrarian Technical University (Belarus), Kastamonu University (Turkey), Putra University (Malaysia), etc.

On the basis of signed agreements on international cooperation in the field of education and science, the members of the department have undergone advanced training and internships at the Weihenstephan-Triesdorf University of Applied Sciences, at the University of California at Davis, and at the AGH University of Science and Technology in Krakow.

Within the framework of the implementation of the Ministry of Science and Higher Education Development Concept for 2023-2029, Michal Bembenek, Professor of the Department of Production Systems, Faculty of Mechanical Engineering and Robotics AGH, University of Science and Technology Krakow (Poland), visited our department from September 22 to October 6, 2023. He gave practical classes, lectures for students, masters and doctoral students of our faculty. He advised master's and doctoral students on theses and dissertations, shared with the faculty the peculiarities of publishing scientific articles in international peer-reviewed journals indexed in the Web of Science and Scopus databases.

Educational work with students of the department  is an integral part of high-quality training of specialists and is carried out with the aim of developing an active civic position in students, preserving and enhancing moral, cultural and scientific values ​​in the conditions of modern life, developing constructive behavior in the job market, as well as maintaining the traditions of the university and department. In order to attain previously set goals, the following is being committed to:

■ conditions are created for effective interaction between all participants in the educational process (joint events are held for students and curators of academic groups);

■ conditions are created for the formation of a positive attitude of students towards themselves and the world around them (trainings, quizzes, round tables are held aimed at understanding the inner world of students);

■ junior students successfully adapt to the educational process;

■ gifted students are identified and supported in every possible way (work is organized according to the university’s research and development work plan);

■ the adaptation level of students to the modern job market requirements is increasing;

■ activities are carried out aimed at preventing and overcoming deviations in the social development of students (active inclusion of students in extracurricular activities);

■ favorable conditions are created for living and independent work in student dormitories (visits to academic groups by curators according to the approved schedule).

The main work focus of curators with academic groups are consultations on all educational issues during curatorial hours. Curators organize excursions, festive evenings, individual work with students, assure participation of young people in events held at the university, within the city and region.

Students also receive individual support and advice from the advisor when choosing an individual learning path, putting together specific disciplines and on general issues during the educational process. In order to improve the qualifications of our specialty, increase the involvement of students in modern technology and new technologies, the department holds an Olympiad in the “Robotics” discipline annually. Such Olympiads are organized so that students can master modern technology and combine theoretical knowledge with practice. The best works of our students were submitted to university and republican scientific competitions. Based on the results of these competitions, many students who took prizes were rewarded with certificates and valuable gifts.

In the 2023-2024 academic year, a comradely basketball tournament was held between Astana universities. 6 of the best universities in the capital took part in it.

Teams NU, MNU, APEMS competed in group A, and teams from KAZATU, ENU GOTEBELES, AITU competed in group B.

According to the results of the game, the team from our university KAZATU took the 1st place. This team included a 4th year student of academic group 06-064-20-08 Bakirov Muhammed.

A “Brain Ring” game was held among students at the university, organized by the Emergency Situations Department. The goal of the game is to develop students' immunity to corruption, a culture of integrity, moral education, and increase the activity of young people. In this game, students of the technical faculty, team "A-TWO", led by Volzhsky Beknazar, took 1st place. The team also included the 1st year students of academic group 06-064-23-06 Iles Zhusipbek, Zhaksylykova Shugyla and Tanzharyk Duman.

Student of academic group 06-064-21-07 Zhumataev Ali took the 3rd place at| Championship of the Republic of Kazakhstan in rugby-7 among men's teams (major league), season 2022.

Student of academic group 06-064-21-07 Seilbek Alkey took the 2nd place in the open republican boxing tournament in memory of the honored trainers of the USSR and the Kazakh SSR among men.

Student of academic group 06-724-18-11 Ayazov Amal is a player of the Astana football club, and together with his team he won silver in the Kazakhstan Premier League.

010000, Republic of Kazakhstan,

Astana, etc. Victories, 62

Corps the «Technical department»,

corps №4

tel.: +7 (7172) 395-314,

e-mail: kafedratmo@bk.ru

Also there is a laboratory of  "Robotics and mechatronics" at the department of “Technological machines and equipment”, where the following types of the equipment and machines are installed:

• 3D printers MakerBot Replicator 5 GEN SPECIAL EDITION
• 3D scanner VT MINI
• 3D printerStratasys F170
• 3D printerCubePro
• SMT placer V-One device which printed circuit board
• UR3 set  of ROBOT-Manipulator 
• Educational and laboratory stand for the study of hydraulic systems Bosch Rexroth
• Educational and laboratory bench for the study of pneumatic systems Festo
• Educational and laboratory bench for studying the automation modules of the mechatronic system Festo
• Mobile 3D EVA scanner
• Arduino Robot Kit, Robotis Stem 
• Research educational robot manipulator DELTA 1-3X-USB

Head of laboratories: Grishin Alexander Nikolaevich, candidate of technical sciences, associate professor. 

E-mail: agun_grishin@mail.ru 

landline phone: 8(7172) 39-74-51 

Main activities: 

• creation of a qualitative experimental and production base for the study of disciplines of specialties of technical profile;
• use of the results of scientific research in metalworking and welding when developing and creating the design of technological machines and equipment;
• preparation and training of students, undergraduates and doctoral students on the latest achievements of scientific and technical progress in the field of metalworking and welding of agricultural and food machinery. 

Goal and tasks 

The main goal is to create conditions for the training of highly qualified personnel in the field of agricultural engineering, the introduction of advanced teaching methods in the educational process using modern technologies of welding production and metalworking, and the development of scientific research. 

Maintasks: 

1. training of students, undergraduates and doctoral students through their preparation in accordance with scientific and technical forecasts, state plans and programs, to solve the main scientific and technical problems aimed at improving the technical and economic level of production and quality of products in agricultural and food machinery;
2. provision of training, retraining and advanced training of personnel based on the latest achievements of scientific and technological progress in metalworking and welding;
3. the implementation of their own and joint research with other organizations, R&D, contractual projects with the development and creation of fundamentally new equipment, technologies and materials;
4. use of the results of scientific research in the educational process, attraction of students, undergraduates and doctoral students to R&D, formation and development of scientific schools;
5. expansion of cooperation with educational institutions of Kazakhstan and foreign countries. 

Instrumentation 

• Universal lathe CJ 0623;
• Drilling machine 6Н8;
• Milling machine PROMA FPX-20E;
• Universal screw-cutting lathe SPD-1000P;
• Hydraulic press;
• CNC milling machines Tormash - 4 units;
• Band-sawing machine ARG 400 Plus S.A.F;
• Welding machines MIG-200 - 5 units;
• MTR-1701 contact welding;
• Press scissors NG5222;
• Pipe bending machine;
• Robot manipulator UR-3;
• 3D scanner VTMini;
• 3D printerMakerBot Replicator - 3 units;
• 3D printer StratasysF-170;
• Lathe (table top) SPB-500/400;
• Drilling machine E-1516VL / 400;
• Two-disk grinding machine;
• Universal milling machine FVV-30;
• Milling machine FPV25LP;
• SMTplacerV-One printed circuit board device;
• SolidWorks licensed program;
• Press brakes DENER SMART XL CNC;

Doctoral students of the Department of TME

Invited lecturers from Malaysia and Turkey

Competition in chess

Visiting Kazakh National museum

Invited lecturers from Belarus